Signed in as:
filler@godaddy.com
The Problem
Most industrial motors and equipment operate at 70% to 80% efficiency under a full load and 60% to 70% efficiency at lower load levels. This non-productive energy wastes money and also shortens the life of inductive equipment such as motors, HVAC equipment, pumps and major appliances.
The CoreCutt Energy Solution
Our energy reduction system corrects spikes in the energy you pay for and creates a uniform leveled power draw, thereby avoiding the constant surges that occur when your equipment is powered on. In other words, electricity is stored, flattened and released, resulting in Guaranteed Energy Savings!
How It Works
Our energy reduction system uses state of the art technology to actively monitor and improve the power usage in your business. Our technology reduces power and Kilowatt demands, in addition to providing voltage stabilization by storing excess energy. This excess energy is then released as required by your business’ electricity demands.
The system is able to supply the load with constant voltage during the ongoing power surges that happen frequently in your business and resulting in real energy savings of 12%-30%. As an additional benefit, the technology also greatly reduces the number of electromagnetic fields present through the conversion of this non-usable waste to usable power.
Who it helps
Commercial users of electricity experiencing excessive monthly power utility charges.
CoreCutt technology works primarily for inductive loads in commercial or industrial environments. An inductive load is defined as an electrical load that has inductive properties, which means that the alternating load current lags behind the alternating voltage of the load. Inductive loads can cause excessive voltages to appear when switched on, which can damage equipment. Inductive loads also pull a large amount of current (inrush current) when first energized. After a few cycles or seconds, the current “settles down” to the full load running current. As a result, inductive loads run very inefficiently.
• Refrigeration
• Air conditioning
• Transformers
• Electric heat pumps
• Water pumps
• Dishwashers
• Garbage disposals
• Washers / Dryers
• Pool and spa equipment
• Any device powered with a motor, compressor or pump.
Because inductive loads are present in all commercial and industrial electrical environments, virtually any business will benefit by using our energy management system.
